Self Priming Cum Centrifugal Mud Pump :- |
| |
|
| |
Self Priming- Centrifugal Pumps:-
| Material of Construction : |
| |
Standard |
Options |
| Casing |
Cast iron FG 260 |
SS-304/316/gunmetal |
| Impeller |
Cast iron FG 260 |
SS-304/316/gunmetal |
| Shaft |
EN-8 |
SS-410/304/316 |
| Sleeve |
SS-410 |
SS-304/316 |
| Gland |
TIWA |
Mechanical seal,
Teflon Gland, Gland. |
|
Special Features :- |
|
 |
-
Excellent quick automatic priming action without foot valve up to 8 mtrs.
-
Back pull out design, so easy maintenance without disturbing pipe lines.
-
Minimum parts, fast repairing at low cost, Also pump is available at economical rate.
-
Monobloc pumps can be able to with wide voltage fluctuations.
-
Less expensive & easily available spares.
-
Easy to install:- only the suction hose is immersed in the liquid, the pump can be set up high and dry in the most convenient position for inspection and maintenance.
-
Long Life:-The parts subject to wear can be easily replaced one or more times to restore the original performance.
|
|
Application:-
- Dewatering Basements, Trenches, Construction sites.
- Any application where priming is to be avoided.
- Industry : Transfer of clean or dirty neutral, acid or alkali liquids containing sand, mud or solids in suspension; clean or dirty low viscosity petroleum products or solvents: milk of lime, caustic soda; washing, cooling, circulation; smoke scrubbing; emergency duty.
- Waste treatment : Pumping polluted, hot or corrosive water containing sand, mud or solids in suspension; dosing neutralizing liquids; pumping out settled sludge.
|
|
|
